Communication manual 8400 motec PROFIBUS
About this documentation
6 L EDS84DMOTPBUS EN 3.0 - 11/2011
1 About this documentation
Contents
This documentation exclusively contains descriptions of the PROFIBUS bus system for the
Inverter Drive 8400 motec.
The properties and functions of the PROFIBUS for Inverter Drives 8400 motec are described
in detail.
Typical applications are explained with the help of examples.
This documentation also contains ...
the most important technical data for PROFIBUS communication;
Information on the installation and commissioning of the PROFIBUS network;
Information on the PROFIBUS data transfer;
Information on monitoring functions and troubleshooting and fault elimination.
The theoretical concepts are only explained to the level of detail required to understand
the function of the PROFIBUS communication with Inverter Drives 8400 motec.
Depending on the software version of the controller and on the version of the »Engineer«
software installed, the screenshots in this documentation may vary from the »Engineer«
depiction.
This documentation does not describe the software of other manufacturers. No
responsibility is taken for corresponding information given in this documentation.
Information on how to use the software can be obtained from the documents of the host
(master).
All brand names used in this documentation are trademarks of their respective owners.
Tip!
Detailed information about PROFIBUS can be found on the website of the
PROFIBUS user organisation:
www.profibus.com
Note!
This documentation supplements the mounting instructions and the hardware
manual "Inverter Drives 8400 motec" supplied with the controller.
To Next Page
Loading...
Need help?
General
