Lenze E84DGFCp Series User Manual

EDS84DMOTPBUS EN 3.0 - 11/2011 L 39
Communication manual 8400 motec PROFIBUS
Process data transfer
Port interconnection of the process data objects (PDO)
For some process data words, you can also assign signals to the individual bits via
the and buttons.
 Select the signals and then confirm the selection with OK.
The current interconnection is only displayed if the following control mode has
been set in code C00007 = 40: Network (MCI/CAN).

Lenze E84DGFCp Series Specifications

General

Brand	Lenze
Model	E84DGFCp Series
Category	Conference System
Language	English