Cooling fan failure service check
Action Yes No
Step 1
a Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests > Fan
(main)
b To uc h Start.
Does the fan spin?
Contact the next
level of support.
Go to step 2.
Step 2
a Remove the right cover. See “Right cover removal” on
page 186.
b Reseat the fan cable from the controller board.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Replace the fan. See
“Cooling fan removal” on page 190.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
6yy errors
600‑611 error messages
Error code Description Action
600.01 Toner tally from the RIP was not received. See
“Engine error service check” on
page 129.
600.02 Video did not start.
600.04 Duplex page was not picked.
600.05 Invalid PH NVRAM Type error was detected.
600.06 Paperport driver is unresponsive.
600.07 Page is at image point before EP is ready.
600.09 EP update error was detected.
600.10 EP late run‑in error was detected.
600.95 RIP intentionally declared a jam error, usually to
prevent a kiosk user from printing free pages.
602.19 Tray 1 was unable to be ready for picking.
602.29 Tray 2 was unable to be ready for picking.
602.39 Tray 3 was unable to be ready for picking.
602.49 Tray 4 was unable to be ready for picking.
4600-830, -835, -895
Diagnostics and troubleshooting
128