Loading paper and specialty media
MS312 and MS317 paper size and type setup
Setting the paper size and type
1 From the printer control panel, navigate to:
> Paper Menu > > Paper Size/Type >
2 Select Tray [x] Size or Tray [x] Type, and then press .
3 Change the paper size or type setting, and then press .
Notes:
• The paper size setting for the standard 250‑sheet tray (Tray 1), optional 250‑ or 550‑sheet tray (Tray 2),
and the multipurpose feeder must be set manually in the Paper Size menu.
• The factory default paper type for Tray 1 is Plain Paper.
• The factory default paper type for the multipurpose feeder is Custom Type 6.
• The paper type setting must be manually set for all trays.
Configuring
Universal paper settings
The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the
printer menus.
Notes:
• The smallest Universal paper size is 76 x 127 mm (3 x 5 inches), and is supported only from the
multipurpose feeder.
• The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper
sources.
From the control panel, navigate to:
> Paper Menu > > Universal Setup > > Units of Measure > > select the unit of measure
>
Specify the paper height and width
1
From the control panel, navigate to:
> Paper Menu > > Universal Setup > > Units of Measure > > select the unit of measure
>
2 Press the arrow buttons until Portrait Height or Portrait Width appears, and then press .
Loading paper and specialty media 32
To Next Page
Loading...
Need help?
General
