3 Change the settings, and then press .
MS315, MS415, and MS417 paper size and type setup
Setting the paper size and type
1 From the printer control panel, navigate to:
> Settings > > Paper Menu > > Paper Size/Type >
2 Press the up or down arrow button to select the tray or feeder, and then press .
3 Press the up or down arrow button to select the paper size, and then press .
4 Press the up or down arrow button to select the paper type, and then press to change the settings.
Configuring Universal paper settings
The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the
printer menus.
Notes:
• The smallest Universal paper size is 76 x 127 mm (3 x 5 inches), and is supported only from the
multipurpose feeder.
• The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper
sources.
1 From the control panel, navigate to:
> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select a
unit of measure >
2 Select Portrait Width or Portrait Height, and then press .
3 Press the left or right arrow button to change the setting, and then press .
Using the standard bin and paper stop
The standard bin holds up to 150 sheets of 75‑g/m
2
(20‑lb) paper. It collects prints facedown. The standard bin
includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.
Loading paper and specialty media 33
To Next Page
Loading...
Need help?
General
