LG 22LX570M User Manual

18
206-4281
EZ-Manager Wizard (Cont.)
(Continued from previous page)
3. In the Data Channel eld, either key in or use the Left/Right arrow keys to select the RF
channel number that will be used by the Pro:Centric server as its data channel. The Data
Channel value can be set from 1 to 135. *
4. Once all elds are completed as required, you have two options:
• To save the data entered and exit the wizard, use the arrow keys to select Exit and then press
OK. In the subsequent pop-up conrmation window, select Save and Exit, and then press
OK once more. The Pro:Centric application and/or E-Z Installation data will be downloaded to
the TV at a later time. This option is useful, in particular, if the Pro:Centric server has not yet
been congured.
Are you sure you want to exit the wizard?
If you select ‘OK’ now, your settings will be lost
and you will exit the setup wizard.
This window will close and you will be returned to
the previous page automatically in 2 seconds.
Save and Exit
Cancel
OK
!
• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the
arrow keys to select Next, and then press OK.
Note: Pro:Centric server data must be present on the RF channel selected as the TV’s Data
Channel in order for you to select “Next” (you will see a “data channel found” message below
the Signal Quality indicator).
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed
with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the
Pro:Centric Conguration screen example on previous page). When the Pro:Centric conguration
is complete, an EZ-Manager Conguration Complete screen (see example on previous page) is
displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Conguration Complete screen on display, you also have the option
to manually turn off or reboot the TV. If desired, select Turn Off or Reboot, respectively, and then
press OK on the Installer Remote.
USB Conguration
TV Manager / USB Download Menu options enable you to download conguration or software les
individually from a USB memory device to the TV. You can also use the Ez Download utility available
from the menu to select one of each type of le to be downloaded at one time using one process.
Each of the USB download functions requires that you have the appropriate le(s) loaded on a
USB memory device. If you wish to perform a software update or download a splash screen
image, the software/image le(s) must be stored in a folder named “LG_DTV” in the root directory
of the USB device. Clone/Conguration (.tlx) les should simply be stored in the root directory of
the USB device. The procedure below assumes that the desired le(s) is/are already loaded onto
the USB device. For further information on TV Manager / USB Download Menu functions and le
requirements, and/or for information on creating Clone or FTG Conguration (.tlx) les, refer to the
appropriate section(s) in this document.
* PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.

LG 22LX570M Specifications

General

Panel life	- h
Pixel pitch	- mm
Response time	9 ms
Display diagonal	21.6 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Display technology	LED
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
USB version	2.0
USB 2.0 ports quantity	1
Product color	Silver
Product design	Digital signage flat panel
Panel mounting interface	75 x 75 mm
RMS rated power	5 W
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
Sustainability certificates	RoHS, ENERGY STAR
Certification	UL, FCC, RoHS, cUL, NOM, Energy Star 7.0
Picture mode	Vivid, Standard, Eco, Cinema, Sport, Game

Weight and Dimensions

Depth	50.8 mm
Width	508 mm
Height	304.8 mm
Weight	2720.5 g