Owner’s & Installation Manual 31
30 New Wide Wired Remote Controller
Owner's Instructions
Press button to turn on the
indoor unit.
1
Press button to select
Dehumidification mode.
The temperature setting cannot be
adjusted during operation this mode.
2
Press the button to select
airflow rate SLO → LO → MED
→ HI → AUTO.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)
3
Press button to turn on the
indoor unit.
1
Press button to select Fan
Mode.
2
Every time pressing button, you
can select wind flow in order of
SLO
→ LO → MED → HI → SHI.
When running ventilation,
compressor of the air handling unit
does not work.
3
Standard Operation - Fan Mode
It removes humidity while air-cooling slightly
It blows the air as it is in the indoor, not the cold wind.
• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
• The menu item of wind powerfulness might not be partially selected according to the product.
• Ventilation drive does not release cool wind but general fan
• Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
• The menu item of wind powerfulness might not be partially selected according to the product.
Standard Operation - Dehumidification Mode
Owner's Instructions
Press button to trun on the
indoor unit.
1
Press button to select
cooling operation mode.
2
Press button until ‘Po’ is
displayed.
3
It makes the room cool using pleasant and fresh air quickly
It supplies warm wind to the indoor
Standard Operation - Heating Mode
Press button to turn on the
indoor unit.
1
Press button to select
Heating mode.
(To check the indoor temperature,
press the room temperature button.)
2
Adjust the desired temperature
by pressing buttons.
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.
3
What is Power Cooling?
• Power Cooling cools the room quickly by blowing 18°C(64°F) air at the most powerful fan speed
available.
C
Partial product has no power air-cooling function.
• Heating drive only operates for the heating and cooling models.
• Heating does not operate at cooling exclusive model.
Standard Operation - Power Cooling
To Next Page
Loading...
Need help?
General
