Owner’s & Installation Manual 51
50 New Wide Wired Remote Controller
Press button to move to 'Minute'
setting mode. (the 'Minute' segment will
flash)
7
Setting Minute value by pressing
button.
8
Press button to finish.
9
Pressing the button will
exit the settings mode. If
is not pressed, the remote
controller will automatically
exit setup mode after 25 seconds with
no input. If the set button is not
pressed, the changes will not take
effect.
10
Owner's InstructionsOwner's Instructions
Function setting - Auto Cleaning
Please press button.
1
Move to auto cleaning menu by pressing
button twice. 'Auto cleaning' icon will
be displayed and the current status,
'DISABLE' will blink.
2
If moving to ‘ENABLE’ icon area by using
button, ‘ENABLE’ icon blinks, and
auto cleaning function is setup if pressing
button at that time.
3
When returning to auto cleaning no use, auto
cleaning function is cancelled if moving to
‘DISABLE’ icon by pressing button and
then, pressing button.
4
Pressing the button will exit the
settings mode. If is not pressed, the
remote controller will automatically exit
setup mode after 25 seconds with no
input. If the set button is not pressed, the
changes will not take effect.
5
The method to setup Auto Cleaning
• Auto Cleaning function might not be operated at the partial product.
To Next Page
Loading...
Need help?
General
