Owner’s & Installation Manual 33
32 New Wide Wired Remote Controller
Owner's Instructions
Standard Operation - Temperature Setting/Room Temperature Check
We can simply adjust the desired
temperature.
• Press the buttons to adjust the
desired temperature.
: Increases the temperature
: Decreases the temperature
Cooling operation:
- The cooling mode does not work if
desired temperature is higher than room
temperature Please lower the desired
temperature.
Heating operation:
- The heating mode does not work if desired
temperature is lower than room
temperature Please increase the desired
temperature.
1
When you press the button, the room
temperature will be displayed for 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
The location of the remote controller
may cause the remote to display a
different temperature than you
experience elsewhere in the room.
1
Temperature Setting
Room Temperature Check
• For air-cooling drive, from 18℃(64℉) to 30℃(86℉), and for heating drive, from 16℃(60℉) to
30℃(86℉), you can select desired temperature.
• 5℃(10℉) is proper for the difference between room and outside temperature.
• Room temp: Indicates the current room
temperature.
• Set temp: Indicates the temperature that user
want to set.
Owner's Instructions
Press button to turn on the
indoor unit.
1
Press button to select
Artificial intelligence Mode.
2
You can adjust
the temperature
as the picture on
the right for
cooling and
heating model.
3
For the case of
cooling exclusive
models, as the
picture on the
right, you can
adjust the temperature
from hot to cold, from
"-2" to "2" based on "00".
4
When cold
When cool
When appropriate
When warm
When hot
Standard Operation - Auto Operation Mode
During operating Auto Operation mode:
• We can use the FAN SPEED button
• We can change manually to other operation mode.
To Next Page
Loading...
Need help?
General
