LG MultiV Series User Manual

Owner’s & Installation Manual 41
ENGLISH
40 New Wide Wired Remote Controller
Sub function - Robot Cleaning Manual Setup
Press the button until the
icons flashes.
1
Turn on/off Smart Clean function
by pressing button.
❈ When the cleaning is finished,
the smart cleaning display
disappears automatically.
❈ To cancel robot cleaning manual setup
function, you move to power saving
menu by pressing button, and then
if pressing button, "robot cleaning"
icon disappears and the function is
cancelled.
2
Pressing the button will exit
the settings mode. If is not
pressed, the remote controller
will automatically exit setup mode after
25 seconds with no input. If the set
button is not pressed, the changes will
not take effect.
3
Owner's Instructions
Robot cleaning function is the function for cleaner attached to the product to automatically clean the
filter when using air-conditioner for the specific period of time.
Owner's Instructions
Energy-Saving Cooling improves the user’s comfort by slowly changing the set temperature to an
energy efficient setting .
Sub function - Energy-Saving Cooling Operation
Press the button until the
icons flashes.
1
Operate or cancel Energy-Saving
function by pressing
button.
(To cancel power saving function,
you move to power saving menu by
pressing button, and then if pressing
button, power saving icon disappears
and the function is cancelled. )
2
Pressing the button will exit
the settings mode. If is not
pressed, the remote controller
will automatically exit setup
mode after 25 seconds with no input. If
the set button is not pressed, the
changes will not take effect.
3
• Energy-Saving Cooling is only available when the indoor unit is in Cooling mode.
• Power saving cooling might not be available on all types of indoor unit

LG MultiV Series Specifications

General

Brand	LG
Model	MultiV Series
Category	Remote Control
Language	English