60
ENGLISH
View PC
To see the PC screen on the projector
Connect wireless
1 Press the button on the remote control.
2 You can launch the Screen Share application.
3 Add a wireless connection device on your PC.
If the operating system of your PC is Windows 7 or Windows 8.1, run Intel®
WiDi.
4 Your projector will be displayed in the list of available devices.
5 Select your projector and request connection.
6 After the connection is established, the projector will display the screen of the
connected device.
• Always update your device to be connected to your projector to the latest OS
version for a reliable connection.
• It is recommended that you use this function at close range.
• Though it can be connected without a wireless router, connecting your device
to a 5 GHz router is recommended because the performance can be affected by
the surrounding wireless environment.
• It supports the connection over the Intel® WiDi 3.5 version.
• The response rate may vary, depending upon the user’s environment.
• It’s different from Windows version. For more information on the device you
want to connect to, refer to its user guide.
• If you turn on LISTEN MODE, it may affect the performance of your wireless
connection when connected to an AP. If there are any issues related to wireless
performance, turn off LISTEN MODE.
• For more information, refer to the Screen Share app.
• If connection fails repeatedly, turn off the projector and the device you want to
connect to, then turn them back on and try again.
Connect wired
Connect the PC with projector by HDMI cable.
To Next Page
Loading...
Need help?
General
