LG PF50KA User Manual

34
ENGLISH
Connecting the Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the projector using an RF
cable (75Ω).
You can watch terrestrial or cable
(analog, digital) TV. (The RF cable is sold
separately.)
• Make sure not to bend the copper wire of the
RF cable (75 Ω). Turn the input jack to the right
to fasten it.
• Ensure you use a standard coaxial cable (75
Ω, sold separately) when connecting to the
projector input.
• For better image quality in locations where signal
strength is low, purchase and install a signal
amplifier (booster).
• A signal splitter is required if you want to use two or more projectors
through one antenna.
• If you have any problems when installing the antenna, please consult a
suitable retailer or the store where you purchased the antenna.
Copper wire

LG PF50KA Specifications

General

Display Technology	DLP
Brightness	600 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Lamp Life	30, 000 hours
Built-in Battery	Yes
Wireless	Yes
Speakers	1W + 1W Stereo
Noise	30 dB
Battery Life	Up to 2.5 hours
Projection Size	25" - 100"
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Keystone Correction	Vertical
Resolution	1920 x 1080 (Full HD)
Throw Ratio	1.4 (40"@1.24m)