Using SIMPLINK
With a single remote control, you can easily manage various devices such as a
soundbar or set-top box connected to a TV with HDMI.
Up to three devices can be connected and used simultaneously.
This feature works only with devices with the logo. Check for the SIMPLINK logo
on the external device.
Use of any product other than those specified may cause problems during operation.
To use Simplink, you need to use a high-speed HDMI
Ⓡ
cable with CEC (Consumer
Electronics Control) function. The High-Speed HDMI
Ⓡ
cable has the pin 13 for enabling
information exchange between devices.
If you want to output sound to the external audio equipment connected through the HDMI
cable, set SIMPLINK (HDMI-CEC) to On.
Supported SIMPLINK Functions
Instant Play
When you start a multimedia device, you can immediately watch content from the
device on the TV without having to control anything.
Controlling devices with the TV remote control
Enables the user to control multimedia devices with the TV remote control to watch
content.
The pointer function of the Magic Remote can be limited.
Connect the SIMPLINK HDMI Output port to the TV HDMI IN port with an HDMI
cable.
01
Press the button on the remote control.02
Select Connection Device Connection Settings.03
Set SIMPLINK (HDMI-CEC) to On.04
Configure the Auto Power Sync settings to On or Off. (If Auto Power Sync is set to
On, turning on a SIMPLINK-linked device will turn the TV on. When you turn off the
TV, the device will also be turned off.)
05
Turn on the connected device. When the TV automatically connects to the device,
the input will switch.
If the device is not automatically connected to the TV, click the Input button.
06
To Next Page
Loading...
Need help?
General
