Corrects the difference between the bright and dark areas of the screen for optimal
results depending on the brightness of the picture.
Dynamic Tone Mapping
Suitable contrast settings based on image brightness of the HDR content.
Dynamic Color
To make the image more colorful and lively adjust the Color and saturation of the
picture.
Color Gamut
Selects the range of Colors to display. Set color gamut to Auto according to the
signal, or display more vivid and richer color in the order of Extended and Wide.
Super Resolution
Adjusts the resolution to make dim and blurred images clearer.
Gamma
Adjusts the medium brightness of the picture.
Select Low for a bright picture, select High1 or High2 for a dark picture or select
Medium for medium brightness.
Live Theater or Expert (Bright Room)/Expert (Dark Room) can be selected from
1.9/2.2/2.4/BT.1886.
High2/BT.1886 expresses the gradation in ITU-R BT.1886, which is an international
standard.
White Balance
The function to adjust each color to be reproduced more accurately based on white
allows you to adjust the overall color tone of the screen to your preference.
Color Temperature
Select Warm1/Warm2/Warm3 for warm colors, select Cool for cold colors or select
Medium for medium colors.
Method
This method is used for fine-tuning the color temperature setting. You can control
the color temperature at two points of the bright part and dark part of the video if you
select 2 Points, at each point of 10 levels if you select 10 Points IRE, and at each
To Next Page
Loading...
Need help?
General
