Vertical Zoom
You can adjust the vertical dimension of the screen and align the screen vertically by
using Adjust Zoom Ratio and Adjust Screen Position.
4-Way Zoom
You can adjust the horizontal/vertical/diagonal dimensions of the screen and align the
screen horizontally/vertically by using Adjust Zoom Ratio and Adjust Screen
Position.
The configurable items differ depending upon model.
The picture may get distorted while zooming in or out.
Selecting a different screen size from the original size may cause the image to look
different.
Depending on the combination of picture format and screen size, the edges may be hidden
or shown in black, or both sides of the picture may flicker. Also, when selecting an item
shown on the broadcast screen, the outline may not be aligned correctly.
Depending upon the input signal, the available screen sizes may be different.
View Screen with Just Scan
Picture Aspect Ratio Settings Just Scan
If you turn this feature On, you can view the content in the aspect ratio that is in the
broadcast signal or content source. If the edge of the screen is not clean please turn it
Off.
If set to Auto, the feature switches between On or Off status depending on the
information contained in the video signal.
The items that can be selected may vary depending on the current input.
To Use Energy Saving Feature
Picture Energy Saving
Reduces power consumption by adjusting peak screen brightness.
Auto
TV sensor detects the ambient lighting and automatically adjusts the screen
brightness.
Some models may not be supported.
To Next Page
Loading...
Need help?
General
