point of 22 levels of the video if you select 22 Points IRE.
Point
Select screen brightness for color temperature adjustment.
If Method is set to 2 Points; use Low to select shadows and High to select
highlights.
If Method is set to 10 Points IRE; you can select brightness using numbers
indicating 10 levels.
When the Method is set to 22 Points IRE, you can select the brightness with the
22 levels of brightness.
IRE
Select screen brightness for color temperature adjustment.
If Method is set to 10 Points IRE; you can select brightness using numbers
indicating 10 levels.
When the Method is set to 22 Points IRE, you can select the brightness with the
22 levels of brightness.
Luminance
You can adjust the selected brightness by points.
You can do these settings only when the Picture Mode is the Live Theater, Expert
(Bright Room) or the Expert (Dark Room) and when the Method is set to 10 Points
IRE or 22 Points IRE.
Red / Green / Blue
Adjust the color temperature of the selected point.
Adjust the intensity of Red/Green/Blue in the range of -50 to 50.
You can adjust respective values for the brightness selected in Point.
Color Management System
This is used when experts control it by using a test pattern. You can control it by
selecting areas of six colors (Red/Green/Blue/Cyan/Magenta/Yellow).
For normal images, adjustments may not result in noticeable Color changes.
Color
From Red/Green/Blue/Cyan/Magenta/Yellow, select a tone to adjust.
Saturation / Tint / Luminance
Adjust the chroma/tint/luminance of the tone in the range of -30 to +30.
To Next Page
Loading...
Need help?
General
