Configuration Overview
11
3.5 Open the Web Interface
To access configuration using the Web interface:
1. Open a Web browser such as Internet Explorer, then
enter the IP address or hostname of the Web card in the
address bar—e.g., http://192.168.0.125.
2. Click on the Configure tab, shown at right.
Configuration Categories appear in the left panel,
organized with folder icons.
3. Click on any configuration category, and the Connect To
box opens.
4. Enter the Administrator username and password (both
case-sensitive):
a. User Name (default is Liebert)
b. Password (default is Liebert)
5. Click OK.
6. Refer to 3.1 - Guide to Configuration for details on
each function.
7. After making changes, click the Save button, then click
on Reinitialize to reboot the Web card and put your
changes into effect (see 3.6 - Saving Changes and
Reinitializing the Web Card).
NOTE
For security, change the default username and
password (see 5.7 - Change Username /
Password - Administrator and General
User).
Configuration
Categories
Configure tab
Connect To
Reinitialize
(to save any changes)
To Next Page
Loading...
Need help?
General
