Network Settings
28
5.4.2 Install Security Certificates - Internet Explorer 6 or earlier
If you use Internet Explorer 6 or an earlier version and select HTTPS as the operation mode of the
Web server (see 5.4.1 - Specify Web Server Settings), follow these instructions to install a security
certificate.
• Open Internet Explorer and enter https:// followed by the IP address or hostname of the Web
card—for example, https://192.168.0.125—in the address bar. The following message appears.
•Click the View Certificate button. This opens the Certificate window.
• In the Certificate window, above left, click the Certificate Path tab.
• In the Certificate Path tab, above right, click on Allegro Root CA, then on View Certificate.
Click on
View
Certificate
View
Certificate
Certificate
Path tab
To Next Page
Loading...
Need help?
General
