Network Settings
14
5.0 NETWORK SETTINGS
The IP Network Settings Menu is used to enable network
communications with the Web card.
Refer to the following sections for detailed step-by-step
instructions on each item from this menu:
Table 9 Network Settings menu guide
Menu item Refer to:
5.1 - Boot/IP Settings page 15
5.2 - Domain Name Server (DNS) Settings page 16
5.3 - Management Protocol page 18
5.4 - Web Server page 27
5.5 - Telnet Server page 32
5.6 - Time (SNTP) Menu page 33
5.7 - Change Username / Password -
Administrator and General User
page 34
5.8 - Reset WEB Authentication to Factory
Defaults (Units with IS-WEBCARD,
IS-WEBL, IS-IPBML, IS-WEBS, IS-IPBMS,
IS-WEBLB, IS-WEBNXL Cards Only)
page 35
IP Network Settings Menu
-------------------------
1: Boot/IP Settings
2: Domain Name Server (DNS) Settings
3: Management Protocol
4: Web Server
5: Telnet Server
6: Time (SNTP)
7. Change Administrator Username/
Password
8: Change General Username/Password
9: Reset WEB Authentication to Factory
Defaults
Option 9 above applies only to
the following cards:
• IS-WEBCARD
• IS-WEBL
• IS-IPBML
• IS-WEBS
• IS-IPBMS
• IS-WEBLB
• IS-WEBNXL
<ESC>: Cancel menu level
Please select a key ?>
To Next Page
Loading...
Need help?
General
