Liebert IntelliSlot Installation Manual

Equipment Information
13
4.0 EQUIPMENT INFORMATION
Equipment Information is optional and identifies the Liebert unit, its
location, a contact person and other information about the unit. The
default value of each field is “Uninitialized.”
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1. From the Main Menu, choose Equipment Information.
2. Enter the number that corresponds to your choice, then enter the identifying information, using
the following as a guide.
Web Interface
To access Equipment Information through the Web interface:
• Click on the Configure tab, then Equipment Information in the left panel and finally Edit in
the right panel. After making changes, click Save.
NOTE
This information also configures the SNMP parameters
sysName, sysContact, sysDescr, and sysLocation available
using RFC-1213 MIB II.
Table 8 Equipment Information identifiers
Item Description Maximum Length*
Name A name for the Liebert unit 255 characters
Contact
A contact person or department responsible
for maintenance and operation of the Liebert unit
64 characters
Location The location of the Liebert unit 64 characters
Description
Other useful information about the unit
for quick reference
64 characters
* Valid characters include spaces and other printable characters except double quotes (").
Equipment Information Menu
---------------------------
1: Name Uninitialized
2: Contact Uninitialized
3: Location Uninitialized
4: Description Uninitialized
<ESC>: Cancel menu level
Please select a key ?>
Edit
Configure tab
Equipment
Information

Liebert IntelliSlot Specifications

General

Brand	Liebert
Model	IntelliSlot
Category	Network Card
Language	English