Lightware MMX4x2 Series User Manual

  

CEC Command Sending
DIFFERENCE:  
The device is able to send and receive Consumer Electronics Control (CEC) commands. This feature is for
remote controlling the source or sink device. CEC is a bi-directional communication via HDMI cable.
INFO:  
and the addressee

case it is 0F or 4F). #cec
Press&Release Commands
DIFFERENCE:  
The CEC commands below are called 'push-button commands' like a button in a remote controller, e.g. volume

devices require this feature for the proper working, but this is necessary only for push-button commands.
Command and Response
ç <port>:sendClick(<command>)
æ <port>:sendClick
Parameters
The <port> parameter means the video input (I1-I4) or video output (O1-O2) port. The following are accepted
as a <command>:
ok number_2 input_select rewind select_media_4
back number_3 display_info fast_forward 
up number_4 power_legacy eject power_toggle
down  page_up skip_forward power_on
left number_6 page_down skip_backward power_off
right number_7 volume_up 3d_mode stop_function
root_menu number_8 volume_down stop_record f1
setup_menu number_9 mute_toggle pause_record f2
contents_menu dot mute play_forward f3
favorite_menu enter unmute play_reverse f4
media_top_menu clear play select_next_media
media_context_menu channel_up stop select_media_1
number_0 channel_down pause select_media_2
number_1 sound_select record select_media_3
Example
ç 
æ 
Further Commands
Command and Response
ç <port>:send(<command>)
æ <port>:send
Parameters
The <port> parameter means the video input (I1-I4) or video output (O1-O2) port. The following are accepted
as a <command>:
image_view_on standby text_view_on active_source give_power_status
standby get_cec_version set_osd clear_osd
The set_osd command requires sending another command as well, see the following section.
Example
ç 
æ 
Sending an OSD String
The OSD string sending consists of two steps. First, set the OsdString property with the desired text, then call
the send method.
Command and Response
ç <port>.OsdString=<text>
æ <port>.OsdString=<text>
ç <port>:send(set_osd)
æ 
Parameters
Parameter Parameter description  
<port> 
output port
I1-I4

O1-O2

<text> The desired OSD string 
numbers (0-9), and dot (.). Max length: 14 characters.
Example
ç 
æ 
ç 
æ 





Lightware MMX4x2 Series Specifications

General

Brand	Lightware
Model	MMX4x2 Series
Category	Matrix Switcher
Language	English