Ethernet
DIFFERENCE:
MMX4x2-HT200 model only.
Ethernet Ports
Ethernet line via each port: the speed and the duplexity of the connection.
The following settings are available for each port:
▪
▪ Reloading factory defaults.
* Only MMX4x2-HT200 model has TPS Ethernet port.
** CPU Ethernet port cannot be disabled.
Ports tab in the Control/Ethernet menu
HTTP Clients (HTTP Post and Put Message Sending)
ATTENTION! This feature means posting or putting HTTP
device. Encrypted transmission (HTTPS) is not supported.
The HTTP Clients tab allows sending HTTP post and put messages to the desired server IP:port no. Control
commands can be send to the target device, but it is not suitable for processing the response (e.g. querying
#http
HTTP Messaging section.
HTTP Clients tab in the Control/Ethernet men
Http header or Http body
To Next Page
Loading...
Need help?
General
