Audio Port Settings from Firmware v1.2.0
ATTENTION!
Audio Port Settings for Firmware v1.1.0 section. The
device, see the
section.
INFO: Audio port numbering can be found in the section.
Command and Response #portstatus
ç
æ <audio_in1_state>;<audio_in2_state>;<audio_in3_state>
Parameters
<audio_in#_state>:
input ports.
Example
ç
æ
Legend
Letter (Character 1)
Mute state Lock state
T
Unmuted Unlocked
L
Unmuted
M
Muted Unlocked
U
Muted
Mute / Lock status
Reserved character, always 0.
Reserved character, always 0.
Reserved character, always 0.
Signal present / Connection status
Letter
Byte 1
Byte 2
Byte 1 Byte 2
Character 2 Character 3 Character 4
BIT 7-6 BIT 3-2 BIT 1-0 BIT 7-6 BIT 3-2 BIT 1-0
Reserved Reserved Reserved Reserved Reserved Reserved
Signal present
status
Connection
status
0 0
Reserved Reserved Reserved Reserved Reserved Reserved
Unknown
0 1
Reserved
1 0
No signal Not connected
1 1
Signal
presents
Connected
M 0 0 0 F
Unlocked,
Muted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Reserved Reserved Reserved Reserved Reserved Reserved
Signal
presents
Connected
The Most Common Received Port Status Responses
T000A
T 0 0 0 A
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0
Reserved Reserved Reserved Reserved Reserved Reserved No signal Not connected
T000B
T 0 0 0 B
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1
Reserved Reserved Reserved Reserved Reserved Reserved No signal Connected
T000F
T 0 0 0 F
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Reserved Reserved Reserved Reserved Reserved Reserved Signal presents Connected
Only for A1 and A2 logical audio ports: If the
the cable connection status is unknown - the explanation is a logical port has no pin that can indicate the
signal on the port.
T0008
T 0 0 0 8
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
Reserved Reserved Reserved Reserved Reserved Reserved No signal Unknown
T000C
T 0 0 0 C
Unlocked,
Unmuted
0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
Reserved Reserved Reserved Reserved Reserved Reserved Signal presents Unknown
To Next Page
Loading...
Need help?
General
