MMX4x2 series – User's Manual 68
those settings to the others, thus saving time and resources. #backup #congurationcloning
ATTENTION!
slot, download it separately and upload it in the target device.
Backup tab
Cloning Steps in a Nutshell
Step 1.
Step 2.
Step 3.
modifying the static IP address is needed when DHCP is not used.
Step 4.
Step 5.
ATTENTION!
slot, download it separately and upload it in the target device.
Save the Settings of the Device (Backup)
Step 1. Apply the desired settings in the transmitter (port parameters, crosspoint, etc.)
Step 2. Select the SettingsBackup tab from the menu.
Step 3. description in the text box on the left (optional).
Step 4. Press the Create a full backup
BACKUP_<DEVICE TYPE>_SN<SERIAL NUMBER>.LW3
Step 5. Set the desired le name, select the folder and save
TIPS AND TRICKS:
usage more comfortable.
About the Backup File
ATTENTION! Editing the command lines is recommended for expert users only.
See the entire list of saved data in the Content of Backup File section.
To Next Page
Loading...
Need help?
General
