Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hex format.
Detected Indicator gives feedback about the given IR code detected currently.
Repeat timeout (ms) You can set a timeout to avoid involuntary code recurrence.
Actions
Action buttons for the desired IR code:
Save
Cancel
Learn: learning the detected IR code.
You can check the detected IR codes in this panel. Pressing the Clear
Autoscroll.
Event Manager. For more details about events, see Event Manager section.
Learning IR Codes
Step 1. Connect the IR detector unit to the IR IN port of the receiver.
Step 2. Click on the Learn button.
Step 3.
button to learn.
Step 4. OK to
continue.
Step 5. Optionally type a unique name for the code in the Name text box. The default name is code#, e.g.
code0.
Ports
The user can set the name and command injection port for each source and destination. For more details,
about IR interface see the Messaging Options section.
Infra tab - Ports window
Clear all IR codes
To Next Page
Loading...
Need help?
General
