UCX series – User's Manual 102
ɯ <ip><usb_port>
ɯ body: <locked_state>
ɯ <ip><device_id>
ɯ body: <device_pwr>
Set the USB Autoselect Policy
ɯ <ip>
ɯ body: <op_mode>
ɯ <ip>
ɯ body: <out>
Change the Autoselect Included USB Ports
ɯ <ip><host>
ɯ body: <state>
Change the USB Port Priority
ɯ <ip><host>
ɯ body: <prio_num>
USB Port Settings - USB-C Related Commands
Set USB-C Power
ɯ <ip>
ɯ body: <power>
Set Displayport Alternate Mode Policy
ɯ <ip><usb-c_port>
ɯ body: <dp_policy>
ɯ <ip><usb-c_port>
ɯ <ip><usb-c_port>
ɯ <ip><usb-c_port>
ɯ <ip><usb-c_port>
Set Port Power Role
ɯ <ip><usb-c_port>
ɯ body: <power_role>
EDID Management
ɯ <ip>
ɯ <ip>
ɯ <ip><user_edid>
Emulating an EDID to an Input Port
ɯ <ip>
ɯ body: <source>:<destination>
Emulating an EDID to All Input Ports
ɯ <ip>
ɯ body: <source>
Copy an EDID to User Memory
ɯ <ip>
ɯ body: <source>:<destination>
Deleting an EDID from User Memory
ɯ <ip>
ɯ body: <user_edid>
Resetting the Emulated EDIDs
ɯ <ip>
Set the DHCP State
ɯ <ip>
ɯ body: <dhcp_status>
Change the IP Address (Static)
ɯ <ip>
ɯ body: <IP_address>
Change the Subnet Mask (Static)
ɯ <ip>
ɯ body: <netmask>