D9U003VC0-0101_05
11
2 Safety Instructions
WARNING!
Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is established!
WARNING!
Only authorised and trained person using the tool is allowed to change fuses and power supplies!
WARNING!
This medical device is not intended for oxygen enriched environment!
WARNING!
This medical device is not intended for use with ammable substances!
WARNING!
This medical device is not portable medical electrical equipment!
WARNING!
Patient is allowed to use selected control elements only if hospital personnel had assessed that the patient´s
physical and psychological state is in accordance with use of them and only if the hospital personnel had
trained the patient in accordance with the instructions for use!
WARNING!
Risk of injury due to incorrect use!
► Before placing a patient on a CliniCare 100 HF mattress, always have a qualied person perform a risk
assessment to ensure that the support provided is appropriate and fullls the applicable local stipulations.
► Do not use APT mode for patients undergoing cervical traction. STATIC mode can be used only under
supervision of qualied person.
► When using mattress replacement or overlay systems, make sure to use safe and appropriate siderail po-
sitions and bed height settings. Which positions and settings are safe and appropriate may vary with the type
of bed frame and siderails.
► CliniCare 100 HF mattress without System Control Unit is not intended for immobile patients.
To Next Page
Loading...
Need help?
General
