EasyManuals Logo
Home>Lippert Components>Lifting Systems>PSX2

Lippert Components PSX2 User Manual

Lippert Components PSX2
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
Rev:11.08.19 Page 121 CCD-0001573-08
Automatic Safety Shutoff
If the touch pad is left on and inactive for 4 minutes it will shut off automatically. To reset the system, the
coach ignition must be turned off, then back on, and the ON/OFF button (Fig. 1K) must again be pressed.
Drive Away Protection System
If the ignition is in the “RUN” position, jacks are down, and the operator releases the parking brake, all
indicator lights will flash and the alarm beeper will activate. The system will then automatically retract the
jacks until the jacks are fully retracted or the operator resets the parking brake.
Jacks Up Verification
If the ignition is in the "RUN" position, the parking brake is released, and the vehicle is in motion, the
system may activate the power unit to ensure that the retract pressure is high enough to keep the jacks
fully retracted. The LCD screen will say "JACKS UP VERIFICATION" until the retract pressure has returned to
normal. If the touch pad was previously off, the touch pad will shut off again. No beeping will occur and the
"JACKS DOWN" dash light will not illuminate.
Counterclockwise for normal operation
A
Fig. 4
Fig. 5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components PSX2 and is the answer not in the manual?

Lippert Components PSX2 Specifications

General IconGeneral
BrandLippert Components
ModelPSX2
CategoryLifting Systems
LanguageEnglish

Related product manuals