Lippert Components PSX2 User Manual

Rev:11.08.19 Page 62 CCD-0001573-08
Operation - OneControl App from myRV
Accessing the OneControl App
1. Make sure there is power to the trailer's wireless network.
2. Navigate to the device's (smart phone, tablet, etc.) wifi settings. Turn wireless feature on and connect
to the myRV wireless network.
A. If this is the first time connecting to the myRV wireless network, a password will be required.
B. The password is located on the trailer's wifi hub (Fig. 12).
3. Open the OneControl application on the compatible device.
C. If the device states "Unresolved Network Connection," retry
connecting to the myRV wireless network.
D. Wait for the connection to resolve and display "Connected"
under the myRV wireless connection.
4. The application will request the user to "Agree" to an End User
License Agreement (EULA).
E. Create a 4-digit Personal Identification Number (PIN).
F. Enter the PIN when prompted by the "Re-enter PIN to confirm."
command.
5. On “Initial Setup”, choose “myRV” (Fig.13A).
6. The OneControl app will now display all functions (Fig. 14).
Basic Jack Operation In Standard Mode
To reach Standard Mode (Fig. 11) for leveling:
1. Power on the OneControl Touch Panel App. See "Accessing the OneControl App,"steps 3-5.
2. Press the "Leveler" icon (Fig. 14A).
3. The screen will show the system menu (Fig. 11) for Standard Mode. The Power Tongue Jack can be
extended/retracted in Standard Mode. Front and rear jacks cannot be operated in Standard Mode.
A
A
Fig.12
Fig. 13
Fig.14

Lippert Components PSX2 Specifications

General

Brand	Lippert Components
Model	PSX2
Category	Lifting Systems
Language	English