EasyManuals Logo
Home>Lippert Components>Lifting Systems>PSX2

Lippert Components PSX2 User Manual

Lippert Components PSX2
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Rev:11.08.19 Page 90 CCD-0001573-08
Standard Mode and Menu
To reach Standard Mode (Fig. 2) for leveling:
1. Power on the OneControl Touch Panel (Fig. 2K).
2. Press "MyRV Control Panel" on the main screen.
3. Press the "Leveler" icon.
4. The screen will show the system menu (Fig. 2) for Standard Mode. The front jacks can be extended/
retracted in Standard Mode. Rear jacks can be retracted from this mode.
Operation - MyRV OneControl Touch Panel
Fig. 3
A
B
Basic Jack Operation
While in Standard Mode:
1. Press "RETRACT" (Fig. 2I) or "EXTEND" (Fig. 2J) and "FRONT" to retract or extend front jacks.
2. Press "RETRACT" and "REAR" to retract rear jacks.
3. Press the "AUTO LEVEL" (Fig. 2L) button to start the auto leveling sequence.
4. Press the "AUTO HITCH" (Fig. 2M) button to start the hitch recognition sequence when reconnecting to
the tow vehicle.
5. Use the "UP" or "DOWN" arrow (Fig. 2B) buttons to cycle through the menu screen options:
A. Info: Scroll to "INFO" (Fig. 2C) and press "ENTER" (Fig. 2H) button to display system information,
e.g., angle, jack stroke or software version.
B. Auto Retract: Scroll to "AUTO RETRACT" (Fig. 2F) and press "ENTER" button to start the "Auto
Retract" sequence, which will retract all jacks.
C. Manual Mode: Scroll to "MANUAL MODE" (Fig. 2G) and press "ENTER" button to start Manual
Level operation. Jacks operate in pairs. Use "RETRACT" or "EXTEND" to operate front jacks, right
rear and left rear jacks.
NOTE: Upon entering Manual Mode, a tutorial on operating the jacks will appear on the screen. Press "OK"
to clear the tutorial. To delete the tutorial, click the "Don't show this again" box in the bottom right
of the screen.
I. Press "RETRACT" (Fig. 3A) or "EXTEND" (Fig. 3B) and "FRONT" (Fig. 3) to operate front jacks.
II. Press "EXTEND" or "RETRACT" and "REAR" to operate rear jacks (right rear, right mid, left rear
and left mid).
III. Press "EXTEND" or "RETRACT" and "RIGHT" to operate right jacks (right mid and right rear).
IV. Press "EXTEND" or "RETRACT" and "LEFT" to operate left jacks (left mid and left rear).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components PSX2 and is the answer not in the manual?

Lippert Components PSX2 Specifications

General IconGeneral
BrandLippert Components
ModelPSX2
CategoryLifting Systems
LanguageEnglish

Related product manuals