Connect ID 40-55
User guide
122
Connecting the Audio system
Connect digital audio (pre) amplifier via audio return channel
(HDMI ARC)
Connect the HDMI1 socket of the TV using an HDMI cable with the
HDMI socket of the ARC-compatible audio (pre) amplifier (e.g.Loewe
MediaVision 3D). It is not necessary to log-in the amplifier separately
with the TV set.
The TV sound can be played back via the Media Vision 3D/Subwoofer-
System.
More information on the wiring of the MediaVision 3D, speakers an
the subwoofer you find in the instruction manual of the corresponding
device.
Connecting audio system to the tv set
HDMI1
TV set
Subwoofer
MediaVision 3D
Connecting the HiFi/AV amplifier
Connecting digital HiFi/AV amplifiers
Connect the digital audio output of the TV set SPDIF OUT to the digital
audio input of the amplifier via a cinch cable:
Reproducing sound via an HiFi/AV amplifier
The sound reproduction via connected HiFi/AV amplifier can be
adjusted in the sound components wizard (see chapter System
settings, section Connections â Sound components).
DIGITAL IN
SPDIF
OUT
Digital amplifier
TV set
Connection example of a digital amplifiers
î
External devices
To Next Page
Loading...
Need help?
General