3 -9
Important to owner, read carefully.
3-2. Left / Right-hand side Levers and Pedals
HST type
Range gear
shift lever
4WD lever
Differential lock
pedal
PTO select lever
PTO switch
Position control
lever
Remote control
lever (optional)
(1) PTO switch
z To operate the independent PTO, comply with the
instruction as below.
1. Place the PTO select lever to desired position.
2. Put the PTO switch to “ON” to operate the PTO.
3. If you want to stop the PTO temporarily, put the
PTO switch in “OFF” position.
4. To change the PTO gear, make sure the PTO
switch in “OFF” position.
▶ To start engine, the PTO switch must be placed in “OFF” position.
▶ Before connecting or checking the implement, place PTO switch in “OFF” position.
▶ PTO shaft rotates even if the tractor moves backward. Pay attention to the
surroundings to prevent an accident.
▶ Do not engage the PTO with the engine running at high speed. Sudden
engagement can cause damage to some implement and tractor. Engage PTO at
low RPM, and then raise engine speed to rated RPM.
Warning
PTO switch
ON : Push and Turn
OFF : Push
To Next Page
Loading...
Need help?
General
