LS tractor J2023H User Manual

4 -1
3. Place the PTO
select lever on “Rear
PTO” position and
HST pedal in “Neutral”
position.
Caution
▶ Check each part before starting the
engine.
▶ Check if there’s anyone close to the
tractor before starting.
▶ Place all the levers and switches in
“NEUTRAL”or “OFF” position.
5. Turn the key switch
to “Preheat” for 10
seconds with checking
if the preheating
indicator is “ON”.
7. Check if engine oil pressure
indicator, battery charging
indicator is OFF.
If these are not go “OFF”, stop the
engine and check the problem.
8. Run engine a few
minutes to allow
engine oil and
transmission oil to
warm up.
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
HST type
Brake pedal
HST pedals
Throttle lever
Range gear
shift lever
Parking brake
lever
(rear cover)
PTO select
lever
PTO switch
2. Place the range gear
shift lever in “Neutral”,
and PTO switch in “OFF”.
1. Sit in the driver’s seat
and apply the parking
brake lever.
6. Turn the key switch to
“Start” position. As soon
as the engine starts,
release the key switch to
the “ON” position
4. Push the throttle
lever forward to middle
position of full throttle.

LS tractor J2023H Specifications

General

Brand	LS tractor
Model	J2023H
Category	Tractor
Language	English