4 -5
(4) Stopping tractor
Caution
▶DO NOT keep apart from the tractor in the state that the transmission gear is
placed in neutral and the parking brake is not applied. In neutral position, the wheel
may roll.
Apply the parking brake at all times before leaving the tractor.
1. Take a foot off from the HST pedal,
and press the brake pedal.
Place the range gear shift lever in
“Neutral” and PTO switch to “OFF”.
3. Engage the parking brake lever after
pressing brake pedal, and take foot off
from the brake pedal slowly.
2. Pull throttle lever backward to lower
the engine speed.
Turn the key switch to “OFF” position.
HST Type
Parking brake
lever
PARK
Brake pedal
Key switch
PTO
switch
Brake pedal
Throttle lever
HST pedals
To Next Page
Loading...
Need help?
General
