4 -4
(2) Changing speed
HST type
(3) Emergency Stop
3. Apply the parking brake after pressing
brake pedal.
1. Take a foot off from the HST pedal
and press the brake pedal at the same
time.
HST type
2. Turn the key switch to “OFF” position.
Do not press the HST pedal before the
engine STOPS completely.
PTO
switch
HST
pedals
Throttle
lever
z Move throttle lever forward to increase the
driving speed.
z Depress the HST pedal forward/backward or
slightly/fully to control the driving speed.
z Set driving speed properly depending on the
road condition with range gear lever.
z The range gear shift lever must be operated in
the neural state of this pedal, and after tractor
has stopped completely.
Brake pedal
Parking brake
lever
PARK
Brake pedal
Key switch
Throttle lever
HST pedals
To Next Page
Loading...
Need help?
General
