3 -10
REAR PTO
MID /
REAR PTO
MID PTO
▶ After placing PTO switch in “OFF” and PTO shaft has stopped completely, place
the lever to desired position.
▶ If the PTO select lever is NOT engaged smoothly, lift up and down on implement to
align the drive shaft.
Caution
(2) PTO select lever
z PTO select lever can choose M/PTO,
M/PTO+REAR, and REAR PTO function.
REAR PTO : 540 rev/min (Engine : 2603 rev/min)
MID PTO : 2000 rev/min (Engine : 2700 rev/min)
z Before starting engine, place the PTO select lever
on “REAR PTO” position for starting engine. If the
lever is placed on the other position, you can not
start engine, due to safety interlock system.
(4) Range gear shift lever
z Low speed, neutral and high speed is available.
▶ Before operating range gear
shift lever, HAVE TO STOP the
tractor completely.
Caution
Range gear shift lever
(3) Work light switch
z There is a switch to turn on the rear work light.
z ON - place the switch to the right direction and
the work light shall be ON.
z OFF - place the switch to the left direction and
the work light shall be OFF.
▶When driving on the road at night, do not let the rear work light stay “ON”. It may
cause a disturbance to the driver of the following car.
Caution
ON
OFF
To Next Page
Loading...
Need help?
General
