EasyManuals Logo
Home>LS tractor>Tractor>MT345E

LS tractor MT345E User Manual

LS tractor MT345E
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
5 -22
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
or HST pedals
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
Before starting engine, check the followings carefully to avoid any failure or damage.
(1) Engine oil
Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
Checking engine oil level
- Check the engine oil level before starting
engine or at 5 minutes later after stopping
engine.
- Check if the oil level is between MAX and MIN
marks of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Oil gauge
Oil filling inlet

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LS tractor MT345E and is the answer not in the manual?

LS tractor MT345E Specifications

General IconGeneral
BrandLS tractor
ModelMT345E
CategoryTractor
LanguageEnglish

Related product manuals