5 -41
(2) Replacing Air cleaner element
(Dry type)
Remove the cover and pull the primary element
straight out, ensuring the safety filter element
remains in place.
Clean the inside of the air cleaner housing using
a clean damp cloth, being careful not to damage
the safety element.
Check if there is damage inside the filter
element by using a light. If finding tiny cracks or
small holes in the filter element or the gasket is
damaged, change it with a new one.
Insert the filter element deeply into the filter
housing.
Remove the dust of the evacuator valve and clean the inside of the cover.
Assemble the cover with the evacuator valve facing downwards.
▶ Do not start the engine or close the hood if the filter element is not assembled..
Notice
Primary
element
Evacuator valve
Safety filter
element