5 -39
1. Flip over the driver’s seat forward.
2. Disconnect the two fuel lines (suction/return line) and plug the fuel hoses not to spill the diesel fuel.
3. Loosen the locking bolts and brackets completely.
4. Tilt the fuel tank and lift it up.
When assembling the fuel tank, comply with the disassembling procedure in reverse.
(5) Cleaning fuel tank
Contaminants such as dust, water and sediment
in the fuel tank will cause to malfunction of the
fuel injection system.
Clean fuel tank periodically.
The fuel tank is very heavy. Cooperate with
other people to lift up/down the fuel tank.
Use clean diesel or approved detergent by
manufacturer to clean inside the fuel tank.
When disassembling the fuel tank, comply with
following procedure.
Bolts
Suction line
Return line
Brackets
Heavy parts!
▶The fuel tank is very heavy. When removing/attaching the fuel tank, please be
careful and cooperate with other people, and use suitable equipment to move the
heavy part. Failure to comply could result in death or serious injury.
Warning
▶ Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel
system component that will be disconnected. Fit a suitable cover disconnected fuel
system component.
▶Do not throw the exhausted waste fuel to any place. This may pollute the soil and
water seriously and also is prohibited legally. If violating, you would be responsible
for that by civil or criminal case. The waste oil must be disposed according to the
environment laws.
Caution
To Next Page
Loading...
Need help?
General
