1
2
3
Removing and installing crankshaft seal
(flywheel end)
74
Removing crankshaft seal
Fig. 1
Remove flywheel, see page 72.
Use special tool (Fig. 2) or a screwdriver to prise
out seal.
Fig. 2
Special tool for prising out crankshaft seal.
Installing crankshaft seal
Fig. 3
When fitting a new shaft seal, you should also ex-
change the bearing race of the flywheel.
Insert new shaft seal into flywheel housing.
Use mandrel (special tool) to drive in sealing ring
until flush.
Observe the remarks and assembly instruction on
page 76.
To Next Page
Loading...
Need help?
General
