Manitowoc Grove CD3340B User Manual

GROVE 7-19
CD3340B/YB4411 TRANSMISSION AND TORQUE CONVERTER
7
Published 04/07/2015 Control # 569-00
Table 7-2
Instrument Panel Wire Harness Check
NOTE: ECU operation - the application of the parking brake de-energizes all solenoids except when in 4th gear (to enable
stall testing).
NOTE: ECU operation - pressing the kickdown button places the transmission in the next lowest gear (i.e. 4th goes to 3rd,
3rd goes to 2nd, 2nd goes to 1st). This lasts until the timer runs out or another gear and/or direction is selected.
See Notes Below
Key for the table: X Full battery charge
- No voltage measured with key On
N.C. Pin not connected
Forward Gears Reverse Gears
Pin No. Function F1F2F3F4R1R2R3R4
1 Jumps to 10 --- ----
2N.C.
3N.C.
4 Reverse - - - - X X X X
5 4th Gear ---X---X
6 Kickdown ----- --
7 2nd Gear - X - - - X- - -
8 Parking Brake --------
9 Alarm Buzzer --------
10Jumps to 1 --------
11GND --------
12GND --------
13 Low Oil Pressure SwitchXXXXXXXX
14 N.C.
15 3rd Gear - - X X - - X X
16 Forward X X X X - - - -
17 N.C.
18 1st Gear X - - - X - - -
19 N.C.
20Neutral --------
21 N.C.
22 N.C.
23 +12V XXXXXXXX
24 +12V XXXXXXXX
25 GRN Pison Factory Use Only
26 RX Pison Factory Use Only
27 TX Pison Factory Use Only
28 CTS Pison Factory Use Only
29 N.C.
30 N.C.
31 N.C.
32 N.C.
33 N.C.
34 N.C.
35 N.C.
36 N.C.
Reference Only

Manitowoc Grove CD3340B Specifications

General

Brand	Manitowoc
Model	Grove CD3340B
Category	Construction Equipment
Language	English