Manitowoc Grove GRT8100 User Manual

INTRODUCTION GRT8100 OPERATOR MANUAL
1-2
Published 3-25-2020, Control # 595-10
crane operator position as measured by Annex G.1 of
EN 13000:2010+A1:2014.
Vibration Level Test Results
• At the operator station with closed cab operation,
vibration levels are less than 0.5 m/s/s for Whole Body
Vibration exposure and are less than 2.5 m/s/s for Hand
Arm Vibration exposure when measured according to
89/392/EEC Community Legislation on Machinery per
standard ISO 2631/1 - Evaluation of Human Exposure to
Work Body Vibration, ISO 5349 - Guidelines for the
Measurement and Assessment of Human Exposure to
Hand Transmitted Vibrations, and ISO/DIS 8041 -
Human Response Vibration Measuring Instrumentation.
SERIAL NUMBER LOCATION
Refer to Figure 1-1.
Whenever contacting your local Grove distributor or
Manitowoc Crane Care have the serial number of the crane
available.
Serial Numbers are located at the following places on the
crane:
1. Stamped on frame.
2. Data plate inside cab.
3. Operator Manual cover.
FIGURE 1-1
Serial Number Locations
3
1
2
8848-4

Manitowoc Grove GRT8100 Specifications

General

Brand	Manitowoc
Model	Grove GRT8100
Category	Construction Equipment
Language	English