Manitowoc Grove GRT8100 User Manual

Grove Published 3-25-2020, Control # 595-10 3-23
GRT8100 OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Toggle counterclockwise and select Menu icon to exit this
group
.
Press OK/Enter button on display or jog dial (6) (Figure 3-13)
to exit outrigger screen.
Press Escape button (1) (Figure 3-13) to leave menu and
return to CCS main screen. The operator can now navigate
to the RCL screen.
Telescope Operation Menus
Telescoping Menu (1) displays telescope operating display
for modes A, B, and X.
Manual Telescoping (2) displays telescope operating display
for Manual Mode only.
Telescoping Configuration (3) displays screen to enable or
disable Mode A, B, or X (Mode M can not be changed).
Telescoping Configuration Screen
Select On/Off buttons (1) to enable or disable A, X, or B
modes. Mode M can not be disabled.
Disabled modes are not shown on the RCL setup screen
(Quick Select or Wizard).
CAUTION
The operator must select the proper load chart and RCL
program for the outrigger position selected.
8662-2
3
2
1

Manitowoc Grove GRT8100 Specifications

General

Brand	Manitowoc
Model	Grove GRT8100
Category	Construction Equipment
Language	English