Manitowoc Grove GRT8100 User Manual

Grove Published 3-25-2020, Control # 595-10 5-9
GRT8100 OPERATOR MANUAL MAINTENANCE AND LUBRICATION
5
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube
Capacity
Lube Interval Application
Drive Train
1 Air Cleaner Filter
Figure<$p
aranum>
--- ---
• Replace filter element
when indicator shows
red.
2 Fuel Filter
Figure<$p
aranum>
--- ---
Change filter every 500
hours or 6 months.
Fuel filter is located
on inside right hand
side of frame beside
engine.
3
Engine
Crankcase
Figure<$p
aranum>
F
Tier 3 and
Tier 4
20 L
(21 qt)
• Check level every 10
hours or daily
• Drain, fill and replace
filter every: 500 hours
(0-500 ppm sulfur fuel);
400 hours
(500-5000 ppm sulfur
fuel); 250 hours
(>5000 ppm sulfur fuel)
• Through fill cap to
FULL mark on
dipstick
• Refer to Item 6.
4
Engine Cooling
System and SCA
Levels
Figure<$p
aranum>
C, D
52.7 L
40 qt
• Check coolant level
every 10 hours or daily
• Check SCA levels
every 500 hours
• Check coolant for
contamination every
1000 hours
• Check level in
sight glass at
rear of crane.
• Superstructure
must be rotated
to access filler
on top of carrier.
5
Transmission,
Torque
Converter
Figure<$p
aranum>
E
37.9 L
(55.6 qt)
• Check level every 10
hours or daily
• Drain and refill every
1000 hours or 6 months
Through fill pipe to
FULL mark on
dipstick

Manitowoc Grove GRT8100 Specifications

General

Brand	Manitowoc
Model	Grove GRT8100
Category	Construction Equipment
Language	English