Grove Published 4-09-2021, Control # 364-11 2-3
RT765E-2 OPERATOR MANUAL SAFETY INFORMATION
If this crane becomes involved in a property damage and/or
personal injury accident, immediately contact your Grove
distributor. If the distributor is unknown and/or cannot be
reached, contact Product Safety at:
Grove U.S. L.L.C.
1565 East Buchanan Trail
Shady Grove, PA 17256-0021
Phone: 888-777-3378 (888-PSR.DEPT)
717-597-8121
Fax: 717-593-5152
E-mail: product.safety@manitowoc.com
OPERATOR INFORMATION
You m ust read and understand this Operator Manual and
the Load Chart before operating your new crane. You must
also view and understand the supplied safety video. This
manual and Load Chart must be readily available to the
operator at all times and must remain in the cab (if equipped)
or operator’s station while the crane is in use.
The Operator Manual supplied with and considered part of
your crane must be read and completely understood by each
person responsible for assembly, disassembly, operation
and maintenance of the crane.
No personnel shall be allowed to climb onto the crane or
enter the crane cab or operator’s station unless performance
of their duties require them to do so, and then only with
knowledge of the operator or other qualified person.
Allow No One
other than the operator to be on the crane
while the crane is operating or moving, unless they are
seated in a two-man cab.
Do not remove the Load Chart, this Operator Manual, or
any decal from this crane.
Inspect the crane every day (before the start of each shift).
Make sure that routine maintenance and lubrication are
being dutifully performed. Don’t operate a damaged or poorly
maintained crane. You risk lives when operating faulty
machinery—including your own.
If adjustments or repairs are necessary, the operator shall
notify the next operator and personnel responsible for the
maintenance and repair of the crane.
OPERATOR QUALIFICATIONS
Qualified person is defined as one who by reason of
knowledge, training and experience is thoroughly familiar
with crane operations and the hazards involved. Such a
person shall meet the operator qualifications specified in
Occupational Safety and Health Administration (OSHA)
Regulations (United States Federal Law), in ASME B30.5
American National Standard, or in any other applicable
federal, state or local laws.
Make sure that all personnel working around the crane are
thoroughly familiar with safe operating practices. You must
be thoroughly familiar with the location and content of all
decals on the crane. Decals provide important instructions
and warnings and must be read prior to any operational or
maintenance function.
Refer to the Parts Manual for this crane for the locations of all
safety decals.
You must be familiar with the regulations and standards
governing this crane and its operation. Work practice
requirements may vary slightly between government
regulations, industry standards, and employer policies so a
thorough knowledge of all such relevant work rules is
necessary.
To Next Page
Loading...
Need help?
General
