Metso Valvcon ADC Series User Manual

V-Series
3/4 NPT Standard
1/2 NPT with Bushing
6.000
6.1
3.1
4.1
5.8
1.7
*12.8
11.1
10.3
Optional
Handwheel
Shown
10.8
9.8
7.5
4.6
3.3
Female Square Drive
All Dimensions in inches unless otherwise
TO REMOVE COVER REQUIRES AN ADDITIONAL 5.75"
stated
LV-Series
*11.7 WITHOUT HANDWHEEL
Female Keyed Drive
4.6
0.75" MIN.
.C.B "610.4NO
4 X M8-1.25
2.756" B. C. ON
4 X M10-1.5
0.75" MIN.
SEE TABLE
20 mm
22.4 mm
4.8 mm
Approximate Weight 17 lb / 8 kg
Approximate Weight 31 lb / 14 kg
17.2 DIMENSIONS
Figure 26
ADCSERIES ENCLOSURES 150600 LBIN
Mounting Flange, ISO 5211
F05 / F07
ADCSERIES ENCLOSURES 10003000 LBIN
Mounting Flange, ISO 5211
F07 / F10
Actuator Size Drive Option Drive Type Drive Size Depth
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Standard Square 1.000 (25mm) 1.20 (30.5mm)
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Option “I2” Square 0.669 (17mm) 1.20 (30.5mm)
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Option “I3” Square 0.748 (19mm) 1.20 (30.5mm)
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Option “I4” Square 0.866 (22mm) 1.20 (30.5mm)
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Option “Y2” Keyed 0.787 (20mm) 1.50 (38.1mm)
1000-3000 lb-in (83-250 lb-ft; 113-339 Nm) Option “Y3” Keyed 0.984 (25mm) 1.50 (38.1mm)
Actuator Size Drive Option Drive Type Drive Size Depth
150-600 lb-in (12-50 lb-ft; 17-68 Nm) Standard Square 0.750 (19mm) 0.90 (22.9mm)
150-600 lb-in (12-50 lb-ft; 17-68 Nm) Option "I1" Square 0.551 (14mm) 0.90 (22.9mm)
150-600 lb-in (12-50 lb-ft; 17-68 Nm) Option "I2" Square 0.669 (17mm) 0.90 (22.9mm)
150-600 lb-in (12-50 lb-ft; 17-68 Nm) Option "Y1" Keyed 0.591 (15mm) 1.40 (35.6mm)
150-600 lb-in (12-50 lb-ft; 17-68 Nm) Option "Y2" Keyed 0.787 (20mm) 1.40 (35.6mm)
IMO 6/18
22 IMO-I4900 EN

Metso Valvcon ADC Series Specifications

General

Brand	Metso
Model	Valvcon ADC Series
Category	Controller
Language	English