MG-MINA/LINA/750-LFC GRID ASSEMBLY GUIDE
63
MUB-MINA/LINA POLE-MOUNT CONFIGURATIONS
Up to two LINA loudspeakers can be pole-mounted with the MUB-MINA/LINA U-bracket. The MUB-MINA/LINA U-bracket
should be secured to the pole-mount adapter with fasteners placed in the U-bracket’s two 1/4-inch, non-threaded, center
holes. The LINA cabinet is secured to the U-bracket with the screws and washers included with the MUB-MINA/LINA kit. A
second LINA cabinet can be stacked on top of the first cabinet and secured with the top unit’s GuideALinks.
For pole-mounted configurations, the MUB-MINA/LINA can be oriented for either maximum downtilt (with the slot near the
rear of the loudspeakers) or maximum uptilt (with the slot near the front of the loudspeakers).
• For a single pole-mounted cabinet, the MUB-MINA/LINA supports continuous angles from +10 to –10 degrees in the
maximum downtilt orientation, and angles from 0 to +20 degrees in the maximum uptilt orientation.
• For two pole-mounted cabinets, the MUB-MINA/LINA supports fixed angles of 0, +5, and +10 degrees depending on the
orientation.
CAUTION: When mounting the MUB-MINA/LINA on a pole, make sure the pole and pole-mount adapter have
been rated to support the full weight of the U-bracket and loudspeakers. Observe all safety precautions speci-
fied by the pole and pole-mount adapter manufacturer.
NOTE: For illustrations showing which MUB-MINA/LINA mounting holes and slot configurations to use to
achieve specific angles for pole-mount applications, see Table 14 and Table 15 on page 62.
Figure 55: Pole-Mounted MUB-MINA/LINA using 35MM Pole Stand Adapter (PN 40.010.971.01) to Support Two LINAs
To Next Page
Loading...
Need help?
General
