69
CHAPTER 13: THE MCF-MINA/LINA CASTER FRAME
The MCF-MINA/LINA caster frame safely supports up to five LINAs for transport and groundstacking, making it easy to
assemble or disassemble arrays. The caster frame’s sturdy construction allows it be conveniently moved with forklifts.
The LINA at the bottom of the stack attaches securely to the caster frame with its GuideALinks and is secured with the four
quick-release pins (0.25 in x 0.90 in, black button with 6-inch lanyard, PN 134.036) included with the caster frame. The con-
figuration of the GuideALinks for the attached LINA determines its tilt, which can be from +6 degrees (uptilt) to –5 degrees
(downtilt). See Figure 61 and Table 17.
CAUTION: Always use the quick-release pins included with the MCF-MINA/LINA caster frame to secure
groundstacked LINAs to the grid. Do not use the quick-release pins included with LINA in the frame as they are
shorter and will not lock in place.
MCF-MINA/LINA Kit Contents
Figure 59: MCF-MINA/LINA Caster Frame
Table 16: MCF-MINA/LINA Kit Contents (PN 40.207.102.01)
Part Number Quantity Description
45.207.126.01 1 MCF-MINA/LINA caster frame
PN 134.036
4 0.25 in x 0.90 in quick-release pins
To Next Page
Loading...
Need help?
General
