Cleaning and care
104
Removing the back panel
The back panel can be removed for
cleaning purposes.
Risk of injury caused by hot
surfaces.
The steam combination oven gets
hot during operation. You could burn
yourself on the heating elements, the
oven compartment, or accessories.
Allow the heating element, oven
compartment and the accessories to
cool before removing the back panel.
Risk of injury caused by the
rotating fan impeller.
You could injure yourself on the
impeller of the hot air fan.
Never operate the steam
combination oven without the back
panel in place.
Disconnect the steam combination
oven from the mains electricity
supply. Switch off at the wall and
withdraw the plug from the socket, or
switch off at the mains circuit
breaker.
Remove the shelf runners.
Undo the four screws in the corners
of the back panel and take it out.
Clean the back panel (see "Cleaning
and Care – Cleaning the catalytic
enamelled back panel").
Refit in the reverse order.
Refit the back panel carefully.
Make sure the openings are located as
illustrated in “Overview”.
Refit the shelf runners.
Reconnect the steam combination
oven to the electricity supply.
To Next Page
Loading...
Need help?
General