Miele DGC 735 Series User Manual

Settings
45
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
A message will appear in your steam
combination oven display if a software
update is available.
You can install the update immediately
or postpone this until later. When the
steam combination oven is switched on
again, you will be reminded about the
update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the steam combination
oven off during the update.
Otherwise, the update will be aborted
and will not be installed.
- Some software updates can only be
carried out by a Miele service
technician.
Software version
The software version menu option is for
use by Miele service technicians. You
do not need this information for
domestic use.
Showroom programme
This function enables the steam
combination oven to be demonstrated
in showrooms without heating up. Do
not activate this setting for domestic
use.
Demo mode
If you switch on the steam
combination oven whilst it is in Demo
mode, the following message will
appear in the display: Demo mode is
activated. The appliance will not heat up.
- On
Touch the OKsensor for at least
4seconds to activate Demo mode.
- Off
Touch the OKsensor for at least
4seconds to deactivate Demo mode.
You can use the steam combination
oven as usual.
Factory default
- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- User programmes
All User programmes will be deleted.
- Recommended temperatures
Any recommended temperatures that
have been changed will be reset to
the factory default settings.

Miele DGC 735 Series Specifications

General

Brand	Miele
Model	DGC 735 Series
Category	Oven
Language	English